Bounce Rate - easy way to lower

Bounce rate is the percentage of single-page visits on the website where visitors have visited the landing page and then left without leaving any trace. The trail can be a comment on the blog, or to open another web page, where traces of this visit is very influential in calculating the bounce rate.

In google analytics assessment of how the percentage of bounce rates can be viewed on the web page Overview Audience.

In general, the bounce rate is a tool to measure how the level of quality traffic in a blog. according to what I gathered from various web sources about the effect of bounce rate, bounce rate is also billed on SEO, because the web has a high bounce rate will be assessed by a web search engine as a less qualified so that when you have to bother to build your website with tricks / SEO tips and blogwalking to it here, but the results are less than optimal in SEO simply because it underestimates the high-low bounce rate of your website, but in addition, according to our consideration of a high bounce rate is very influential for advertisers to put their ads to measure the quality of the a blog. logic happens if visitors do visit for a short time, then your ad will not be seen in a long time.

Bounce rate is above 75%, still seem quite high, so it is necessary tricks to reduce bounce rate optimization as soon as possible.

Read optimization SEO Friendly for Blog

Content-based websites are usually able to achieve a low bounce rate, rather than web-based online store, because the content-based website visitors are able to make a longer stop to read the content. Being web-based online stores and affiliate difficult to get a small bounce rate because the web with the base, when a visitor clicks on one of the items, visitors will be redirected to an affiliate website.

However in our opinion there are ways to reduce bounce rate by making deskrpisi stuff first, so that visitors will read the first description of an item before the visitor clicks on an external link amazon or another website where the transaction further. but the above is just our opinion on how to reduce bouce rate they actually still newby, whether the opinion of the master.

The most decisive factor is the high visitor bounce rate was disappointed with the content of the blog, as well as the length of time loading. how not disappointed, contents not connect with the title, the article is not messy easy to read, as well as the composition of elements that do not blog regularly seem to be enforced so long loading. for sure the size of the bounce rate is calculated as customarily is:

1. visitor pressing the "back" button to browse.
2. visitor closes the window / browser tab the pages visited.
3. visitor clicks on one of the ads.
4. visitors to click on any of the external links.
5. visitors use the search box on one page.
6. visitors to type in a new url in the same browser.

Then the question?

1. What is a good bounce rate for a website as a form of SEO optimization.
2. How do I create a web baounce have a low rate ? or How to Reduce Bounce Rate or
3. How do I calculate the bounce rate ?

1. To measure how good bounce rate for SEO: there is no reference standard, what a good bounce rate. however, as noted above, preferably under 75.

2. How do I make the web is able to achieve a low bounce rate, is the same as the way SEO on page optimization, because logically bounce rate calculations are also based on how big the convenience of visitors to a web.
   If visitors like a web, it is certain that visitors linger, to explore all the web contents, in general it can be said with the duration of a visitor in the web and occurs repeatedly, then baunce rate is low, but if the visitor would not feel at home , whatever the reason the visitor must leave immediately. one article if judged disappointing certainly another article the same quality. so even though the web is able to be at the top of the search engines will still bounce rate is high.

3. how to calculate bounce rate when I took from various sources and wikipedia are as follows:
   Bounce rate = the number of visits in a single page / total number of visits
   as an illustration:
   If you have a number of web visits is 100,000 were his 80,000 visits in a single page, so that the bounce rate is obtained number is: 0.8 or 80%,

But actually to see how high the bounce rate of your web just look at google analytics / Audience Overview page.
Ok after knowing how high or low your web bounce rate, immediately do the things necessary to maximize the size of your web bounce rate, with a high sense if things do immediately to reduce the bounce rate of your website. but if it is low. it's up to you, what would you be lifted up again bounce rate ?

when a visitor typing comments in a web / blog, it takes a few seconds / minutes, thus providing more value in the calculation of the bounce rate. then you should answer the comments web / blog, so that visitors feel appreciated and feel comfortable on the blog. Imagine if you store customer arrival, but you ignore its presence, we can be sure that customers will not come back to your store.

Make Earning from Internet through Bidvertiser

One motivation in blogging is to get internet Earning. one way to make earning from blogging is register in ad media. a few Ad media that can be registered like a Adsense, chitika, infolink, and bidvertiser. all of them will pay you for a click and impressions their ad in your web. for optimization your earning, you can find tricks-tricks optimization earning ad media in google. i am not explaining here, because that tricks required a long explain and a variety of techniques and a lot of experience. Need a long time and trial to change repeatedly a template ad in your web.

Or you can Optimization SEO your web, so that when the crowded traffic of your blog, your ad automatically becoming more frequent so that revenue from advertising increased as well. i am not will explain way to register in ad media, because is very simple, you just to fill a form that gives. if level of visit your web have been achieve more than 5.000 possibility will be accepted, but under that certainly will be rejected.

Read optimization SEO Friendly for Blog

Here i will explain how to registered a site in Ad media bidvertiser, i will not start from fill a form, because is very simple, you just fill all data until finish and wait a notification from BidVertiser. Accepted or Rejected. while waiting you can do this step

To begin displaying BidVertiser ads on your site, simply follow these steps:

1. Choose your ad template by clicking "Choose Template".
2. Click "Get Ad Code" to get your ad HTML code.
3. Paste the HTML code into your website where you would like ads to be displayed.
4. If needed, click on "Templates Design" on the upper navigation bar to customize the colors and fonts of the chosen template.

Making The Most of Your BidVertiser Ads

1. Place your BidVertiser Ads on each of your website pages, as the visitors of your homepage will also visit another page of your website as well (According to a study announced by onestat.com, almost 55% of all internet users view more than 1 page per visit).
2. Place the ads above the scroll, near the top of your web pages, which can be viewed without scrolling. This will dramatically increase your click ratio, thus, your earnings.
3. Try to match the look of the ads to the look of your website. You can either use the ready-made color palettes or create one on your own. simply click "Choose Template" and "Customize Colors" next to your favorite format.

Maybe article above can be useful for you that interested to register your site to ad media BidVertiser and make internet earning.

Make The Load Lighter Blog

Generally we would want our blog to look pretty, at least we want to show that our blog is a reflection or representation of ourselves, navigation is cool, so it needs a lot of widgets. As I experienced, I wanted my blog gadgets like smartphones that have more features / amenities. But unfortunately that desire must be paid to the large size of my blog, and the length of time required for loading. Arising as a result, we will feel tired of waiting. So if the owner got bored especially our blog visitors. Automatic traffic levels on our blog will never go up. But if you use a domain and paid hosting it may not be problematic. But if we are still using a free platform from blogspot, should look pretty cool and should be considered carefully. Be your choice whether you still want to look pretty and cool but not sold, or simple but a lot of fans. (Yes obviously pretty cool and a lot of fans), if you want your blog to look pretty and a lot of visitors then my advice would just as soon buy a domain and hosting, but if your wallet is thin, try reading How Easy Tips For Make The Load Lighter Blog below but for its application as a way to keep up your SEO optimization.

How To SEO optimization a Blog

1. Enable GZIP Compression with

Modern browsers typically support compression for HTML, CSS and Javascript. Perform compression on three files that will save time loading pages and automatically would be a reduction in download time. The smart webmasters out there we strongly recommend using compressed with gzip. For techniques and tutorials Gzip not I attach here, please search on google .. have a lot. However, if you are using Blogspot platform just ignore this as the default compression blogspot itself already supports these techniques. For users of other plaform like WordPress, please use gzip compression or if not you should bother to use Gzip just use WP Super Cache plugin.

2. Dispose of empty spacing in the HTML

Removing empty Spaces as well as the compression technique, ie by compressing HTML, XML or PHP by removing spaces were deemed useless. One of them includes the Inline for Javascript and CSS code. By removing the empty space will certainly save many bytes of data and the impact will speed up the download process. To discard unnecessary spacing I usually use tools like Notepad + + Editor. It's easy, by blocking all the code you want spaces removed TextFX then select menu -> TextFX Edit and select Delete Delete Surplus Blank Lines or Blank Lines.

3. Perform Compression CSS (stylesheet)

CSS compression technique is actually quite simple, almost the same way as above, namely by removing unneeded space. Compacting CSS coding can also be intensified when downloading, parsing and execution time on a page. Please use the free tools that are widely available such as YUI Compressor and cssmin.js.

4. Put the CSS (stylesheet) on Top

Sometimes we do not put the CSS in the header, it usually means we use to create a single style to a particular style on the widget. The webmasters who are experts usually suggest we should call all the CSS code in the page HEAD CSS either Internal or External CSS should be the one calling all the headers.

5. Remove CSS (stylesheet) unnecessary

When the browser to access the page, usually have to go through the download process and analyze each line of code in the CSS (stylesheet) first, imagine if a lot gratuitous CSS code to be processed but not executed at all! This will be very annoying as it will hinder the process of rendering that should be faster!

6. Check the Validate CSS (stylesheet)

Despite frequent mistakes in writing CSS code, broser will not display any error messages on the screen, all executions will continue to run without any error report even though it was only a one in one letter only. Let's not ignore this error, please check validation.

7. The combination of CSS (stylesheet) in the External File

Disadvantages Internal CSS is only one measure of the swelling capacity (size) on the size of the page. Experienced webmasters should always advised us to call the CSS code with external access, if possible, even better do a combination of all the CSS code in just one file. (For blogger users ignore this technique because it would be great to internal calls)

8. Perform Javascript Compression

Javacsript compression technique similar to the CSS that is by removing unnecessary spaces. Compacting Javacript coding can also be intensified when downloading, parsing and execution time on a page. For simplicity we do the compression on javascript please use the free tools that are widely available as the YUI Compressor, Closure Compiler and JSMin

9. Remove Javascript is not Need

Like it or not the use javacript (JS) is sometimes very necessary, although JS sometimes makes loading pages will be heavier. When a browser accesses a page, usually have to go through the process of downloading and analyzing the code in JS first, imagine if a lot of JS calls in vain to be processed but not executed at all! Please go back and JS code which we think is not useful, check back and do not park too long, if it is not used effectively deleting it!

10. The combination of Javascript in External File

Almost the same is the case with the above CSS External, Internal javascript only one drawback is the size of the swelling capacity (size) on the size of the page. Experienced webmasters always suggesting we should do calls via external access, if possible, even better do a combination of all coding JS in just one file. (For blogger users should if possible dial through internal files only).

11. Perform Image Optimization

Dynamic websites without decorated picture would not attract sufficient, but excessive use of the image will be a problem when the browser to download the page. Should reduce unnecessary images, especially the images that have a large enough size. If it is forced to use it, you should do the optimization in the images by means of compression without compromising image quality. My suggestion please use Yahoo! Smush.it

12. Do not Scale Images in HTML Forced

Avoid using large images just because we can set the width and height in HMTL, we are able to rearrange the images as you please with CSS or in <img> tag as in the following html <img width = "100" height = "100" src = "image.jpg" /> although the actual image size is 200x200px should not shrink by resetting scale images, it is better we make a 100x100px image according to the size of the actual image.

13. Avoid Image SRC empty

Calling SRC tags to images common to two possibilities, either through HTML <img scr=""> or via Javascript var img = new Image (); img.src = ""; although browsers ignore this request if the image is empty, still it is through the process of rendering that should not overload the server. Please check back blank SRC, if it is not used effectively deleting it.

14. Check Back Broken link

Links are already dead would not like readers, let readers .. search engines do not like this though. Make checks broken links as often as possible, many tools on the internet that can perform this task, the best one could use the tools of the W3C Checklink

15. Remove widget or plugin not Need

Widget is too much just makes the page so the more weight, especially the widget is not so useful. Please visit us again aggregated aggregated widgets maanfaat supposing nothing at all like clocks and calendars. Use the widget if only you consider important. Eg; Link / blogroll, Tag Cloud, Search, Labels, Archive Blog, Stats. Logically, on every computer already provides such, clock, calendar. Are supposing clock and calendar widget on your blog visitors expect?

16. Keep content / blog content such as text.

Reduce the use of images, both * jpg or * swf flash format excessive despite its size tends to be smaller.

17. Wear script code that has important benefits only.
For example: Google Analystic, etc..
18. Visitors, most would rather not blog neat and untidy.

19. Thank you for reading Make The Load Lighter Blog to the end. For comments and questions please write and enter in the comment box below. Typists our representative will try to answer as they can.

Installing Rails Canonical

Rel canonical is the addition of the code stored in the template blog that aims to prevent duplicate content, which revents absorption of pages with the same content in a different url address. rel canonical has a function similar to disabling the blog archive, without using the canonical Google search engine will find it hard to prioritize search results.

To install the rails canonical on blogspot, the following steps:

1. Login to your blogger dashboard then = >> = >> edit html design
2. You find the following code <head>
3. Place the following code under the code <head>

<link expr:href='data:blog.url' rel='canonical'/>

4. Continue to save

Simple!

Perhaps the mounting rails so seemingly simple canonical, unlike other Search Engine Optimization tricks are so complicated, but know that the rel canonical has quite a complicated explanation. If you do not want to know, it's not a problem, but it could not hurt anyway, in order to optimize SEO Friendly, we need to really master the subject-the subject matter is in SEO Optimization although it was limited to the understanding and knowing the term alone, the no we are not blind and haphazard in doing SEO optimization techniques. Below I will explain a little about the rel canonical, the extent of my knowledge were sampled from wikipedia. canonical rel canonical is an HTML element that helps webmasters to prevent duplicate content issues with determining the "canonical" or "preferred" version of a web page as part of search engine optimization.

Duplicate content is a term used in the field of search engine optimization to describe the content that appears more than one on a web page. Duplicate content can be a substantial part of the content within or domain and can be exactly duplicate. When multiple pages in the website contain the same, basically a search engine such as Google can penalize or stop the delivery of that site in the search results are relevant, because it is considered as spam. So the punishment was not due to duplicate content, but rather because of the spam.

Duplicate content is divided into two by type are:

• Duplicate Content and Non Hazardous
• Duplicate malicious content.

Non-hazardous types of duplicate content could include variations of the same page, such as the version optimized for HTML, mobile device, or printer-friendliness, or store items that can be displayed through several different URLs. Duplicate content problems can also arise when a site accessible under a subdomain, such as with or without the "www." or where the site fails to handle the trailing slash from the URL correctly. Duplicate content refers to content that is harmful accidentally duplicated in an attempt to manipulate search results and get more traffic. This is known as search spam is to move the alias "301 redirect" Permanently is a method of dealing with duplicate content to drive users and search engine crawlers to a single version of the relevant content.

What Can You Do About Duplicate Content?
To minimize the duplicat content we do these tricks that I took from about.com
The first thing you should do is to avoid creating it in the first place. But once you have it, there are several things you can do to reduce the load on the search engines and help your site indexed better:

1. Use permanent redirect. 301 redirects tell the search engine spiders that the page has moved permanently, so that they will remove the old URL from their index and replaced it with a new one.
2. Use noindex on content syndication. Ask the people who use your syndicated content to include a noindex meta tag in your article so that duplicate content is not included in the search engine index.
3. Avoid repeating boilerplate copy. If you have a page that has a long string of copyright or other boilerplate information at the bottom, it is better to move the content to a separate page, and links to your content pages.
4. Extending the same content page. If you have a page that has very similar information - like travel sites with limited information about the city - you should add to your page to provide more information about this unique topic page. If you can not do that, you have to incorporate the same page together.
5. Provide more unique content. If you run an affiliate website, it can be tempting to just copy and paste the details of the product from stores, such as Amazon, to your page, but it does not add any value so that the search engine will only link to the original site instead. By providing unique content about your product, your site will avoid duplication site shop and get your pages rank better.
6. Use rel = canonical. It is the connection link that Google (and maybe some other search engines) are used to determine the version of the content item. This is a way to tell the search engines that the page is the parent page and any copies shall be subject to this one

But one important note to the bloggers actually, if you do not want to happen duplicate content, is to try to make his own writings, a lot of reading and learning to write, will keep us from the occurrence of duplicate content.